Visonic PowerMax10 Especificações Página 31
- Página / 78
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
30 D-302756
Note: A "+" can be entered at the beginning of the line by pressing
and then .
To enter a series of digits, use the following keys:
<Numeric keypad> - to enter the number
- moves the cursor from left to right
- moves the cursor from right to left
- deletes everything after the cursor (to the right)
4.6.3.5 Configuring the Report Method (Protocol) to Monitoring Station
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the or
button repeatedly until the PowerMax10-G2 display will read [PSTN RPRT FORMAT]
59. Press the
button.
The PowerMax10-G2 display will read [PSTN RPRT FORMAT]. Here you select
the reporting format used by the control panel to report events to Monitoring
Stations.
60.
When the PowerMax10-G2 display reads [PSTN RPRT FORMAT], press the
OKI
button.
The PowerMax10-G2 display will read [
SIA ].
OKI
61. Press the or button repeatedly to select between "SIA", "4/2
1900/1400", "4/2 1800/2300", "Scancom", "SIA text" and "contact ID",
for example, "SIA text".
or
62. Press
OKI
to confirm the selection.
The PowerMax10-G2 display will revert to [PSTN RPRT FORMAT].
OKI
63. Press the button.
The PowerMax10-G2 display will read [4/2 PULSE RATE]. Here you select the
pulse rate at which data will be sent to Monitoring Stations if any one of the 4/2
formats has been selected in PSTN Report Format.
64.
When the PowerMax10-G2 display reads [4/2 PULSE RATE], press the
OKI
button.
The PowerMax10-G2 display will read [20 pps
].
OKI
65. Press the or button repeatedly to select between "10 pps",
"20 pps", "
33 pps" and "40 pps", for example, "40 pps ".
or
66. Press
OKI
to confirm the selection.
The PowerMax10-G2 display will revert to [4/2 PULSE RATE].
OKI
You can now press the button to take you to the "
PSTN RPRT RETRY
"
menu, or press the button to take you to "
<OK> TO EXIT
".
4.6.3.6 Configuring the Number of Retry Attempts
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the or
button repeatedly until the PowerMax10-G2 display will read [PSTN RPRT RETRY].
67. Press the
button.
The PowerMax10-G2 display will read [PSTN RPRT RETRY]. Here you
determine the number of times the communicator will dial the Monitoring
Station’s number via PSTN.
68.
When the PowerMax10-G2 display reads [PSTN RPRT RETRY], press the
OKI
button.
OKI
4
/2 PULSE RATE
P
STN RPRT FORMAT
P
STN RPRT RETRY
2
0 pps
4
/2 PULSE RATE
S
IA
P
STN RPRT FORMAT
4
0 pps
4
0 pps
S
IA text
S
IA text
- PowerMax10 1
- PowerMax10-G2 2
- 2.5 Physical Properties 5
- 3. INSTALLATION 5
- 3.2 System Planning & 7
- Programming 7
- 3.3 Mounting the Unit 7
- 3.4.1 GSM Installation 8
- 3.4.2 PowerLink Installation 8
- 4. PROGRAMMING 9
- 4.1 General Guidance 9
- 4.2 Navigation 9
- NEW INST. CODE 10
- <OK> TO EXIT 10
- NEW MASTER CODE 11
- 36:USER PERMIT 11
- DEFINE PANEL 11
- 25:RESET OPTION 12
- 4.4 Zones / Devices 13
- SAME Dev 15
- EXIT Enrollment 15
- ADD NEW DEVICES 15
- NEXT device 15
- 4.4.2.4 Locations 16
- 4.4.3 Adding Wired Zones 17
- Z01:Motion Sens] 18
- <OFF> to delete] 18
- <OFF> to delete 18
- Z01:Motion Sens 18
- 4.5 Siren Configuration 20
- AREA CODE 23
- GPRS REPORT 26
- 1st RPRT METHOD 27
- RCVR 1 ACCOUNT# 28
- PSTN/GSM RCVR1 29
- PSTN RPRT RETRY 31
- AUTO TEST TIME 32
- PSTN UP/DOWN 34
- REPORT EVENTS 35
- 36
- 4th private tel#] 37
- SMS REPORT TEL# 38
- <OK> 38
- 1st private tel# 38
- 4.10 DEFINE CUSTOM LOCATIONS 54
- 5 DIAGNOSTIC TEST 62
- 5.1 Testing Devices 63
- NO DEVICES 66
- LAN RESET OPTION 66
- WL DEVICES 68
- 7. MAINTENANCE 69
- 7.1 Handling System Troubles 69
- 7.4 Fuse Replacement 70
- 7.6 Restore Factory Defaults 70
- 7.7 Viewing Serial Number 71
- 8 READING THE EVENT LOG 71
- 8.1 Reading the Event Log 71
- A1. Detector Deployment Plan 72
- A2. Keyfob Transmitter List 73
- APPENDIX B. Event Codes 74
- B1. Contact ID Event Codes 74
- B2. SIA Event Codes 74
- B3. 4/2 Event Codes 74
- APPENDIX C. Glossary 75
- Industry Canada Declaration 77
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Visonic PowerMax10
(76 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais