Visonic POWERMASTER-10 Guia do Utilizador descarregar pdf (Página 40)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 39

Additional Information (section C.6)

The LED will extinguish after several seconds. In case of difficulties in communication with the control

panel, the LED may blink for several seconds more while trying to establish communication. During this

period of time the keyfob keys are disabled.

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

The display shows the 1

Keyfob (Keyfob No.1) of the 8 keyfobs.

To abort enrollment press the button.

If the keyfob was previously enrolled in the system, the PowerMaster-10 / PowerMaster-30 display reads

ALREADY ENROLLED

" and then switches to the name of the keyfob alternating with its ID number.

Before you delete a keyfob, identify the keyfob either by the keyfob No., for example, F06, or by the ID

number of the keyfob that appears on the display, and then make sure that it is the keyfob you wish to

delete.

If you regret and wish to abort the procedure, press the button.

Pre-Enrollment Procedure:

Step 4b enables you to register the device ID and to complete the programming process without being in

possession of the device itself (can also be performed off-site by the installer). Enrollment can then be

completed at a later stage by following the same enrollment procedure described in Step 3 without

entering the User Settings menu.

You can now delete another keyfob, select another option in the User Setting menu (see section B.1 and

section B.2), or quit programming (see section B.3).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Sem comentários

Visonic POWERMASTER-10 Guia do Utilizador Página 40