Visonic POWERMASTER-10 - INSTALLER GUIDE Especificações descarregar pdf (Página 68)

8. READING THE EVENT LOG

D-303222 PowerMaster-10/30 G2 Installer's Guide 67

7.6 Annual System Check

Note: The PowerMaster system must be checked by a qualified technician at least once every three (3) years

(preferably every year).

The annual system check is designed to ensure proper operation of the alarm system by performing the following checks:

 Periodic test

 Arm/disarm function

 No trouble messages are displayed on control panel

 The clock displays the correct time

 Reporting: generating an event to be transmitted to the Monitoring Station and to the user.

8. READING THE EVENT LOG

Up to 100 events are stored in the event log. You can access this log and review the events, one by one. If the event

log fills up completely, the oldest event is deleted upon registration of each new event. The date and time of occurrence

are memorized for each event.

Note: Up to 250 events (PowerMaster-10 G2) / 1000 events (PowerMaster-30 G2) are stored in the event log that can

be reviewed via the Remote Programmer PC software application or by the remote PowerManage server.

When reading the event log, events are shown in chronological order - from the newest to the oldest. Access to the

event log is provided by clicking the button and not through the installer’s menu. The reading and erasing

process of the event log is shown below.

Step 1



Step 2



Step 3



Step 4



In normal operating

mode

[1]

Enter Installer Code

[2]

Reviewing Events

[3]

Scroll List of Events

[4]

READY 00:00

ENTER CODE: 

Z13 alarm

SR2 TAMPER-ALARM



LIST OF EVENTS

09/02/11 3:37 P

07/02/11 11:49 a

Step 5



Step 6



Step 7



Step 8



CLEAR EVENT LOG

display

[5]

Erase the Event Log

[6]

Event Log is erased

[7]

Returns to normal

operating mode

[8]

➯



CLEAR EVENT LOG

<OFF> to delete

<OK> TO EXIT

READY 00:00



- Reading Events

[1]

While the system is in the normal operating mode, press the key.

Reading the Event Log

[2]

Enter the current Installer Code and then press to enter "LIST OF EVENTS".

[3]

The latest event is shown.

The event is displayed in two parts, for example, "Z13 alarm" then "09/02/10 3:37 P".

[4]

Press repeatedly to scroll through the list of events.

Erasing and Exiting the Event Log:

[5]

From anywhere within the event log, press the button and then press .

[6]

At this stage in the procedure, clicking the or buttons will take you to “<OK> TO EXIT”

without erasing the event log. Clicking the button will revert to “CLEAR EVENT LOG”.

Press the button to erase the event log.

[7]

The system erases the event log

[8]

Press to revert to normal operating mode.

Clicking the button repeatedly at any stage in the procedure takes you one level up with each click.

Clicking the button will take you to “<OK> TO EXIT”.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

Comentários a estes Manuais

Sem comentários

Visonic POWERMASTER-10 - INSTALLER GUIDE Especificações Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Visonic POWERMASTER-10 - INSTALLER GUIDE