Visonic PowerMax10 Guia do Utilizador descarregar pdf (Página 19)

MENUS AND FUNCTIONS

18 D-302757

C.1 Setting the Zone Bypass Scheme

Bypassing permits arming only part of the system while allowing free movement of people within certain zones

when the system is armed.

It is also used to temporarily remove from service faulty zones that require repair work or to deactivate a sensor

if, for example, you are decorating a room.

♦ Here you can set the Zone Bypass Scheme i.e. to scroll through the list of registered (enrolled) sensors to

your PowerMax10-G2 system and to Bypass (deactivate) faulty or disturbed sensors (either READY or

NOT-READY) or to Clear (reactivate) BYPASSED zones (sensors).

Once you have set a Bypass Scheme you can use the following 3 options:

> To quickly review the bypassed zones – refer to section C.2.

> To quickly clear a bypassed zone i.e. to reactivate the bypassed zone – refer to section C.2.

> To repeat (recall) the most recent zone bypassing scheme – refer to section C.3.

1. Zones will be bypassed throughout one disarm-arm period only. Disarming the system after arming will

suspend the entire bypassing scheme.

2. Fire zones cannot be bypassed.

3. Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of section C.3.

REMEMBER – ZONE BYPASSING COMPROMISES SECURITY!

A. To Bypass a Zone

{

Enter the USER SETTINGS menu and select the [SET ZONE BYPASS]

option.

When the display reads [SET ZONE BYPASS] press

OKI



The first Zone, Z01, is displayed.

Click the

or button until the display reads the zone you

wish to bypass (or clear bypass), for example, "Z04" for Zone 04.



}

When the zone you wish to bypass appears on the display, press

OKI

to confirm.

OKI

The display now reads [<OK> TO BYPASS].

To bypass the selected zone press

OKI

A "Happy Tune" ☺ sounds. The display reads [

Zone BYPASSED

] and

then returns to step |. The zone status is now changed to

BYPASSED.



☺ Return to |

<OK> TO BYPASS

Zone BYPASSED

Z04: Kitchen

Z04: NOT READY

Z01: Living Room

Z01: READY

ET ZONE BYPASS

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Comentários a estes Manuais

Sem comentários

Visonic PowerMax10 Guia do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Visonic PowerMax10