Visonic AMBER CLASSIC Guia do Utilizador descarregar pdf (Página 44)

Chapter 9: Connecting to the Amber Control Panel

44 D-300951 Home Health Care PC User Guide

9.1.2 Remote Connection (Telephone Modem)

This is applicable when the HHCPC is off-site and when using a telephone modem to connect

to the Amber on-site.

1. From the Communications mode drop-down list, select Telephone Modem.

The telephone modem section becomes enabled, and the serial port parameters

change automatically to be displayed as follows:

• The Comm port field becomes disabled and the field value is the

communications port where the modem is connected.

• The Baud rate field displays 115200, the baud rate used for telephone modem

connection.

• The Parity and the Stop bits fields do not change and are disabled.

Figure 9-14: Communications Mode – Telephone Modem

2. In the Telephone Modem section of the dialog box, select from the Modem

drop-down list, the modem to use for connecting to the control panel.

3. Click Settings to display the Modem Settings dialog box, and define the dialing

and modem parameters.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Sem comentários

Visonic AMBER CLASSIC Guia do Utilizador Página 44