Visonic PowerLink Manual do Utilizador descarregar pdf (Página 3)

HP Lights-Out Management System

The HP iLO (Integrated Lights-out) management system provides a better type of access and control of

the server from a remote machine making server administration and support easier and more reliable. For

more details about iLO:

http://h18013.www1.hp.com/products/servers/management/remotemgmt.html?jumpid=servers/lights-out

The iLO interface uses a separate Ethernet port and thus it needs a separate IP address and port

forwarding for the following TCP ports: 443, 23*, 22 (Optional).

* This port will not be used for regular unencrypted telnet sessions but for a secure remote console from

the web interface.

CMS Software

This section applies when connecting Visonic's PowerManage server using a serial/TCP port to a server

running CMS software for reporting.

 The supported protocols are: Contact ID, SIA Level 2, FEP (Bold Manitou), VisNAP.

 Allocate a serial or any TCP port for the connection on your CMS server.

 When using a serial connection:

o Have a serial cable ready for the installation. In most cases, it will have to be a crossed

cable.

o Make sure you know the serial connection details for your CMS server, the common

settings are:

 Baud : 9600

 Data bits: 8

 Parity bit: None

 Stop bit: 1

1 2 3 4 5 6 7 8 9

Sem comentários

Visonic PowerLink Manual do Utilizador Página 3