Visonic KP-160 PG2 Guia do Utilizador descarregar pdf (Página 15)

D-303169 KP-160 PG2 User’s Guide 13

Zone Status Indications

To view the zone numbers of enrolled detectors that are in NOT READY ( ) or

BYPASSED state ( ), repeatedly press the key. Upon each press of the key,

the next zone number appears on the Zone # display (marked "4" in the "Icon and Key

Indications" Figure).

To view the zone numbers that are assigned to a Partition, press the desired Partition

number ( / / ) followed by the key. Upon each press of the key, the

next zone number assigned to the pressed Partition number appears on the Zone # display.

Notes:

A zone which is BYPASSED and NOT READY is shown as BYPASSED ( ).

When "00" appears on the Zone # display, this indicates a NOT READY state in the alarm

system that is not related to any detector, for example, "tamper open" in a keypad or control

panel.

If all zones are READY and "not bypassed", the button is disabled.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Visonic KP-160 PG2 Guia do Utilizador Página 15