Visonic TOWER 20 AM - INSTALLER GUIDE Especificações descarregar pdf

D-304046 TOWER-20 PG2 Installation Instructions 1

TOWER-20 PG2

PowerG,WirelessHigh‐securityPIRMotionOutdoor

MirrorDetectorwithAnti‐masking

Installation Instructions

1. INTRODUCTION

The TOWER-20 PG2 is a 2-way, wireless outdoor digital mirror PIR detector which includes the following features:

 Patented 8 independent quad PIR detectors (Octa-QUAD) operating in true Quad configuration (patented) with true

motion recognition (TMR) processing for each of the 8 PIR detectors, as well as central motion processing that

distinguishes between moving intruders and trees and bushes in motion.



Advanced Obsidian Black Mirror

optics (patent pending).

 Optimum performance even in poor weather conditions such as snow, rain, dust, wind and direct sunlight

 Tamper protection prevents opening and removal from wall

 PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology - provides robustness and reliability that

is closer than ever to wired systems

 Built-in link quality indicators enable installer to check signal quality without physically approaching the control panel, thus

making installation faster and easier.

 Robust housing with recessed window.

 Smart anti masking distinguishes between masking spray and rain.

 Alarm LED is visible in sunlight.

 Automatic termination of walk-test after 15 minutes.

 Microprocessor-controlled temperature compensation.

 Immunity to pets weighing up to 18 Kg (40ib), not pet alley

 Built-in swivel bracket

Figure 1.

General View

2. INSTALLATION

2.1 Installation

A. Bracket installation (see Figure 2). Fix the bracket firmly on a stable wall or pillar. The orientation of the fixed bracket must be as parallel as

possible to the surveyed ground surface.

B. Adjust the detector's horizontal and vertical angles (see Figure 3), according to the surveyed ground surface. The vertical angle indicator

position for various installation height and coverage distance combinations is detailed in Table 1 (the information refers to a relatively flat

surveyed area. Verify the vertical adjustment by walk-test).

C. Fasten the detector to the bracket (see Figure 2 step 4).

Table 1 - Vertical Adjustment Reference

Mounting Height

Coverage Distance

2m / 6.7ft 4m / 13ft 6m / 20ft 8m / 26ft 10m / 33 ft 12m / 39 ft

3.0m / 10 ft - 1 2 2 3 3

2.5m / 8 ft 1 1 2 3 4 4

2.0m / 7 ft 1 2 3 4 5 5

1.5m / 5 ft 2 3 4 5 - -

Correct

Installation

Incorrect

Installation

A. Mark drilling point B. For wall tamper C. Drill

D. Fasten

Note: The 2 screw holes enable adjustment

of the bracket on the wall, if needed, following

the walk test.

E. Three long screws F. Two short screws

Figure 2 - Installation

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - TOWER-20 PG2

D-304046 TOWER-20 PG2 Installation Instructions 1 TOWER-20 PG2 PowerG,WirelessHigh‐securityPIRMotionOutdoorMirrorDetectorwithAnti‐masking

Página 2

2 D-304046 TOWER-20 PG2 Installation Instructions HORIZONTAL ADJUSTMENT (-45 to +45) VERTICAL ADJUSTMENT (0 to -10 in 2.5 clicks / steps) COVE

Página 3 - Step 5 Step 6 Step 7

D-304046 TOWER-20 PG2 Installation Instructions 3 2.2 Battery Insertion It is recommended to perform the first batteries insertion on a flat surface

Página 4 - 2.5 Local Diagnostic Test

4 D-304046 TOWER-20 PG2 Installation Instructions 2.4. Configuring the Detector Parameters Enter the menu and follow the configuration instructions

Página 5 - 3. COMPLIANCE WITH STANDARDS

D-304046 TOWER-20 PG2 Installation Instructions 5 A. LED B. Enroll button C. Tamper switch Figure 5. Tower-20 PG2 3. COMPLIANCE WITH STANDARDS Co

Página 6 - APPENDIX: SPECIFICATIONS

6 D-304046 TOWER-20 PG2 Installation Instructions APPENDIX: SPECIFICATIONS OPTICAL Black Mirror Max. Coverage At least 12 m (40 ft) / 90°Detector Te

Mais documentos para Detetores de movimento Visonic TOWER 20 AM - INSTALLER GUIDE

Para ver o documento Visonic TOWER 20 AM - INSTALLER GUIDE Especificações

Visonic TOWER 20 AM - INSTALLER GUIDE Especificações (10 páginas)

Comentários a estes Manuais

Sem comentários

Visonic TOWER 20 AM - INSTALLER GUIDE Especificações

Consulte online ou descarregue Especificações para Detetores de movimento Visonic TOWER 20 AM - INSTALLER GUIDE. Visonic TOWER 20 AM - INSTALLER GUIDE Specifications Manual do Utilizador

Resumo do Conteúdo

Mais documentos para Detetores de movimento Visonic TOWER 20 AM - INSTALLER GUIDE

Comentários a estes Manuais